LRRT - Utica Station Limestone Replacement

The Niagara Frontier Transportation Authority (“NFTA”) will receive bids on a general contract for the LRRT – Utica Station Limestone Replacement, NFTA Project 13LS2403.

The project consists of one (1) contract; LRRT – Utica Station Limestone Replacement. The project will be implemented under two (2) Notice to Proceeds (NTP) as set forth in the Contract Documents.

The Work of this project provides for repairs to the exterior facade of the above grade portion of the Utica Light Rail Rapid Transit (LRRT) station, including but not limited to, replacement of damaged limestone panels, CMU replacement, sealant joint replacement, and installation of fluid-applied waterproofing. Refer to the Contract Drawings, Project Manual and Technical Specifications for additional information. 

Bids will be accepted either in offline (paper) or online (electronic) versions.

Offline bids should be submitted in an opaque sealed envelope to the Engineering Branch on the 7th floor of the MTC. The lower left-hand corner should be marked as follows: BID NO. E-609. Online bids should be submitted in accordance with the process outlined on the NFTA’s Engineering Branch website. All bids will be opened and read aloud on September 25, 2024, at 10:00 am at the Metropolitan Transportation Center (“MTC”), 1st Floor Conference Room, 181 Ellicott Street, Buffalo, New York 14203. Bids received after the date and time specified above for bid opening shall not be opened and/or considered for award. 

The Contract Documents may be examined in the 7th Floor Conference Room, 181 Ellicott Street, Buffalo, New York 14203 or on the NFTA’s Engineering Branch website at www.nftaengineering.com. Online registration is required to become a Plan Holder and obtain Contract Documents. Copies of the Contract Documents are available at no cost and may be requested from Cindy Cirbus at 716-855-7342 or fax 716-855-7447 or downloaded from the NFTA’s Engineering Branch website. The Contract Documents may be picked up or sent via courier billed to the requester.
The NFTA reserves the right to waive irregularities, to reject any or all bids, and to extend the bidding period. 

Bid security must accompany each bid and must be in an amount not less than ten percent of the total bid price if the base bid exceeds $50,000.00. Bid security may be submitted prior to bid opening either electronically utilizing Surety2000 at www.surety2000.com, or delivered to the NFTA in an opaque sealed envelope. Details for electronic submission are provided on the NFTA’s Engineering Branch website. In the event a bidder utilizes an offline bid but provides bid security electronically the electronic bid bond number must be submitted with the offline bid.

The Contractor shall perform not less than 35% of the Work with its own forces.

The time of completion for NTP-1 is 45 calendar days after receipt of the Notice to Proceed. The time completion for NTP-2 is 60 calendar days. Refer to Technical Specification Section 01 11 00 “Summary of Work” for additional time constraints and milestones associated with this project.

Liquidated damages will be assessed against the Contractor for its failure to complete the project within the time specified as described in Technical Specification Section 01 11 00 “Summary of Work”. 

A Pre-Bid conference will be held on Wednesday, September 11, 2024, at 10:00 a.m.
at 1st floor conference room, 181 Ellicott Street, Buffalo, New York 14203. A site walkthrough at the station will be offered directly following the conference. 

The NFTA goals for this procurement are 0% MBE, 0% WBE, & 0% SDVOB.